Backorder
A2212 13T 1000KV Brushless DC Motor, Outrunner BLDC for RC Plane, Quadcopter Drone, Multirotor DIY, High Efficiency Motor for 2S–3S LiPo with Mounting Accessories
The A2212 13T 1000KV Brushless DC Motor is a widely used outrunner BLDC motor for DIY RC aircraft and multirotor builds. Known for its good balance of efficiency and power, it’s a popular choice for RC planes, quadcopters, drones, and hobby robotics where lightweight, high-RPM performance is needed.
The A2212 13T 1000KV Brushless DC Motor is a widely used outrunner BLDC motor for DIY RC aircraft and multirotor builds. Known for its good balance of efficiency and power, it’s a popular choice for RC planes, quadcopters, drones, and hobby robotics where lightweight, high-RPM performance is needed.
As an outrunner motor, the outer can rotates around the stator, producing strong torque for spinning propellers efficiently. With a 1000KV rating, this motor is well suited for common prop sizes and typical 2S–3S LiPo battery setups (with a compatible ESC). It’s commonly used in training aircraft, foam planes, and small-to-mid multirotors.
What “1000KV” Means
KV indicates RPM per volt (no-load).
A 1000KV motor spins at approximately 1000 RPM per volt (no-load), so:
- On 2S (7.4V) → ~7400 RPM no-load
- On 3S (11.1V) → ~11100 RPM no-load
Actual RPM under load depends on propeller size, ESC, and battery.
Key Features & Benefits
- Outrunner Torque: Efficiently spins propellers with strong torque
- 1000KV Performance: Great balance for many RC planes and quadcopter setups
- 2S–3S Compatibility: Works with common LiPo packs (ESC required)
- Smooth Operation: Suitable for stable flight and consistent thrust
- DIY Friendly Size: Popular A2212 footprint supported by many mounts and frames
Typical Specifications (may vary slightly by batch)
| Item | Details |
|---|---|
| Model | A2212 13T |
| KV Rating | 1000KV |
| Motor Type | Brushless DC Outrunner |
| Battery (Typical) | 2S–3S LiPo (with ESC) |
| Use | RC plane, quadcopter, multirotor, DIY drone |
Note: Propeller size, current draw, and thrust depend on the exact prop + battery + ESC combo. Always match propeller and ESC ratings to avoid overheating.
What You Need (Basic Setup)
To run this motor you need:
- Brushless ESC (Electronic Speed Controller)
- LiPo battery (2S–3S typical)
- Propeller matched to KV and desired thrust
- RC receiver/flight controller for control signal
Common Applications
- RC fixed-wing planes (trainer/foam aircraft)
- Quadcopter and multirotor DIY frames
- Drone builds and upgrades
- Hobby projects requiring efficient high-RPM rotation
No reviews for this component yet.
Related Components
