Backorder
USB to RJ45 Console Cable 1.8m, USB-to-Serial RS232 Console Lead for Router/Switch Configuration, Compatible with Cisco/Network Switches, FTDI/CH340 Console Adapter Type (Generic)
The USB to RJ45 Console Cable (1.8m) is a practical tool for configuring and troubleshooting routers, switches, firewalls, and other network equipment through the device’s RJ45 console port.
The USB to RJ45 Console Cable (1.8m) is a practical tool for configuring and troubleshooting routers, switches, firewalls, and other network equipment through the device’s RJ45 console port. It provides a simple way to connect a laptop/PC to network gear for command-line (CLI) access, recovery tasks, firmware upgrades (console mode), and initial setup—especially when the device has no IP address configured yet.
This cable acts as a USB-to-Serial console adapter with an RJ45 console plug on the other end, commonly used for network administration and lab environments. It’s a must-have for IT technicians, system integrators, and anyone managing network infrastructure.
What It’s Used For
- Initial device setup (before network access is configured)
- Accessing CLI/terminal console on switches and routers
- Password recovery / bootloader access (device dependent)
- Viewing boot logs and diagnosing startup issues
- On-site maintenance and configuration in racks and cabinets
Key Features & Benefits
- USB to RJ45 Console Connection: Connect directly to console ports without extra adapters
- 1.8m Length: Good working distance for racks, cabinets, and bench setups
- Serial Terminal Support: Works with terminal software such as PuTTY, Tera Term, SecureCRT, etc.
- Stable Console Access: Ideal for configuration, monitoring logs, and troubleshooting
- Portable & Durable: Lightweight cable for toolkits, field bags, and lab use
Typical Setup (How to Use)
- Plug the USB end into your laptop/PC.
- Plug the RJ45 end into the network device CONSOLE port.
- Install drivers if required (depends on chipset inside the cable).
- Open terminal software and select the correct COM/serial port.
- Use common serial settings (often 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control) unless your device specifies different settings.
Note: Driver requirements vary by cable chipset (many use common USB-serial chipsets). Most modern systems can install drivers automatically, but some may require manual driver installation.
Specifications (General)
| Item | Details |
|---|---|
| Cable Type | USB to RJ45 console cable |
| Length | 1.8 meters |
| Function | USB-to-Serial console access (RS232/TTL-style console depending on equipment standard) |
| Use | Router/switch/firewall console configuration |
| Connector | USB (PC side) + RJ45 (console side) |
Compatibility note: “RJ45 console” is not the same as Ethernet networking. This cable is for console/serial access, not for LAN data connection.
No reviews for this component yet.
Related Components
