DHT22 Digital Temperature and Humidity Sensor Module with 3-Pin Interface for Arduino, ESP32, Raspberry Pi, DIY Weather Station, HVAC Monitoring, Home Automation Projects

This DHT22 Digital Temperature and Humidity Sensor Module is a ready-to-use environmental sensing solution designed for microcontroller and SBC projects that need convenient, digital measurement of ambient temperature and relative humidity. The module format provides a simple 3-pin connection (VCC, DATA, GND) and is commonly used in Arduino-compatible builds, ESP32/ESP8266 IoT nodes, and Raspberry Pi GPIO projects. The vented protective housing allows air exchange to the sensing element while helping protect it from accidental touch and minor debris, making it practical for prototypes and light-duty installations.

The DHT22-type sensor integrates a humidity sensing element, a temperature sensor, and an internal signal conditioning/ADC stage that outputs calibrated digital data over a single-wire style protocol. Instead of requiring analog inputs, the module communicates using timed digital pulses that represent humidity and temperature data frames. This makes it a strong choice where analog noise, ADC resolution limits, or long-term drift are concerns.

Because the protocol relies on timing, best results come from using well-supported libraries and ensuring stable power and correct pull-up behavior on the data line. Many DHT22 modules include an onboard pull-up resistor or related conditioning components; however, exact component values and presence can vary by module revision. If your controller or wiring length is unusual, consult the module PCB markings and the sensor datasheet to confirm whether an external pull-up is required and what value is recommended.

Sampling behavior is also an important integration detail: DHT22-class sensors are typically intended for periodic measurements rather than high-speed polling. Reading too frequently can lead to repeated values or communication errors. Use appropriate delays between reads as recommended by your library and the datasheet for your specific sensor/module revision.

• Sensor type: DHT22 / AM2302-class digital temperature & humidity sensor (module implementation may vary by revision)
• Output signal: Digital single-wire style protocol (timing-based data transmission)
• Interface pins: 3-pin (VCC, DATA/OUT, GND) as labeled on the module
• Supply voltage: Varies by module revision; commonly used with 3.3V or 5V systems (check datasheet/module markings)
• Logic level compatibility: Typically works with 3.3V and 5V GPIO depending on pull-up and module design (verify for your controller)
• Measurement range/accuracy: Not specified here; depends on the exact sensor element and revision (check datasheet)
• Sampling rate: Not specified here; follow datasheet/library guidance for minimum interval between reads
• Mounting: Through-hole header; module includes a mounting hole (size varies by revision)
• Cable/lead accessories: Jumper wires may be included depending on the kit configuration shown (verify package contents)

• DIY weather station nodes and indoor climate dashboards
• Smart home automation for humidifiers/dehumidifiers and ventilation triggers
• Greenhouse, terrarium, and grow-tent monitoring
• HVAC duct/room logging and environmental data collection
• Classroom electronics labs and sensor interface demonstrations
• IoT telemetry projects using ESP32/ESP8266 with MQTT/HTTP reporting

• Wiring: Connect VCC to your regulated supply, GND to ground, and DATA to a suitable GPIO pin. Keep wiring short where possible for best signal integrity.
• Pull-up: If the module does not include a pull-up resistor on the data line (varies by revision), add an external pull-up to VCC as recommended by the datasheet/library.
• Timing: Use a proven DHT library for your platform (Arduino/ESP32/Raspberry Pi). Avoid overly frequent reads; respect the minimum read interval.
• Placement: For accurate ambient readings, place the sensor where air can circulate and away from direct heat sources, sunlight, or moisture condensation.
• Calibration/verification: For critical use, validate readings against a reference instrument; sensor performance can vary by batch and environment.

1x DHT22 temperature & humidity sensor module