Project 3 of 3 Sensing

Sensor threshold lab

Logs digital channel changes while students compare distance, angle, and ambient light effects.

One of 3 projects in the Fire Detection & Sensor Learning Kit — the parts below are from that kit.

// How it works

What you build in this project

Sensor threshold lab is one focused build from the Fire Detection & Sensor Learning Kit. It uses the parts listed below to make a working electronics example, then you can combine it with the other projects in the kit.

Logs digital channel changes while students compare distance, angle, and ambient light effects.

Parts used

flame sensor, Arduino UNO, serial monitor

What to check

Wire the parts, upload the sketch from the kit page, then test this project by watching the Serial Monitor or the output behavior.

What you learn

You learn how the controller reads real sensor signals, makes a decision in code, and turns that result into a useful output.

// Items used

What this project uses

Every item is in the kit — nothing extra to buy.

flame sensor 5-Channel Flame Sensor Module for Arduino, 3.3V-5V IR Fire Detection Array Board, 5-Way Directional Digital O… DIY-004

In the kit

Arduino UNO UNO R3 Development Board ATmega328P Microcontroller with USB Cable, 5V Logic, 14 Digital I/O, 6 Analog Inputs… UNOR3

In the kit

serial monitor

In the kit

Basics Transparent 830 Points Solderless Breadboard Clear Prototype Circuit Board MB-102 High Quality DIY Electronic… DIY-295

In the kit

Basics Jumper Wire Assorted Pack 120 Pieces - Male-to-Male, Male-to-Female, Female-to-Female 10cm Ribbon Cables for… DIY-212

In the kit

Build this with

Fire Detection & Sensor Learning Kit

All 8 parts in one box, with this project and 2 more to build from them.

Price on request See the kit Request this kit

Need only these parts? Order them loose · from AED 85.01

Used in this project tick what you still need

flame sensor 5-Channel Flame Sensor Module for Arduino, 3.3V-5V IR Fire Detection Array Board, 5-Way Directional Digital O… DIY-004 · ×1

AED 17.85

In stock

Arduino UNO UNO R3 Development Board ATmega328P Microcontroller with USB Cable, 5V Logic, 14 Digital I/O, 6 Analog Inputs… UNOR3 · ×1

AED 26.39

In stock

Also needed untick if you already have them

Basics Transparent 830 Points Solderless Breadboard Clear Prototype Circuit Board MB-102 High Quality DIY Electronic… DIY-295 · ×1

AED 15.75

In stock

Basics Jumper Wire Assorted Pack 120 Pieces - Male-to-Male, Male-to-Female, Female-to-Female 10cm Ribbon Cables for… DIY-212 · ×1

AED 25.02

In stock

Selected parts AED 85.01

One of each part. Packs (resistor assortment, jumper wires) already hold more than a single build needs. serial monitor: included in the kit, ask us for it loose. Delivery is free on orders AED 150.00+.

// Keep going