Desk environment monitor
Shows temperature, humidity, and pressure locally on an OLED screen.
What you build in this project
Desk environment monitor is one focused build from the Environmental Monitoring Kit. It uses the parts listed below to make a working electronics example, then you can combine it with the other projects in the kit.
Shows temperature, humidity, and pressure locally on an OLED screen.
Parts used
ESP32, BME280, OLED display
What to check
Wire the parts, upload the sketch from the kit page, then test this project by watching the Serial Monitor or the output behavior.
What you learn
You learn how the controller reads real sensor signals, makes a decision in code, and turns that result into a useful output.
What this project uses
Every item is in the kit — nothing extra to buy.
Environmental Monitoring Kit
All 6 parts in one box, with this project and 2 more to build from them.
Need only these parts? Order them loose · from AED 105.63
One of each part. Packs (resistor assortment, jumper wires) already hold more than a single build needs. Delivery is free on orders AED 150.00+.
More from this kit
Serial data logger
Streams readings to the serial monitor so students can graph changes over time.
Wi-Fi dashboard prototype
Prepares the hardware for a local web dashboard once network code is tested.