2N3904 NPN General Purpose Transistor Pack - Low Power Amplification and Switching Semiconductor Component for DIY Electronics and Arduino Projects

The 2N3904 NPN General Purpose Transistor is an industry-standard semiconductor component widely utilized in hobbyist electronics, educational kits, and professional engineering prototypes. Housed in a traditional TO-92 plastic package, this versatile transistor is engineered to handle general-purpose low-power amplification and medium-speed switching tasks. Whether you are building simple logic gates, audio preamplifiers, or interfacing microcontrollers like Arduino and Raspberry Pi with higher-voltage loads, the 2N3904 provides reliable performance and predictable electrical characteristics. Its widespread adoption means it is fully supported by extensive documentation, circuit designs, and community resources.

Operating on the NPN silicon planar epitaxial design principles, the 2N3904 features three primary terminals: Emitter, Base, and Collector. It is optimized for low-to-medium current applications where signal integrity and fast response times are critical. The device features a maximum collector-emitter voltage rating of 40V, allowing it to interface comfortably with standard 5V, 12V, and 24V DC control rails. The base-emitter voltage has a maximum threshold of 6V, while the collector current can safely reach continuous levels of 200mA. The DC current gain, designated as hFE, is exceptionally linear across various operating currents, typically falling within the 100 to 300 range at a collector current of 10mA. Thermal dissipation is managed through the standard TO-92 resin casing, which supports a total device dissipation of up to 625mW under standard ambient operating conditions.

• Transistor Type: NPN
• Package Type: TO-92
• Collector-Emitter Voltage (VCEO): 40 V
• Collector-Base Voltage (VCBO): 60 V
• Emitter-Base Voltage (VEBO): 6 V
• Collector Current (IC): 200 mA (Continuous)
• Total Device Dissipation (PD): 625 mW
• DC Current Gain (hFE): 100 to 300 at IC = 10 mA
• Transition Frequency (fT): 300 MHz (minimum)
• Operating and Storage Junction Temperature Range:
• 55 to +150 degree Celsius

This transistor is ideally suited for a broad array of electronic circuits. Common applications include signal amplification in audio preamplifiers, sensor signal conditioning, LED driving circuits, and relay actuation via microcontrollers. It is frequently employed in pulse generation, digital logic inversion, oscillator circuits, and educational breadboard experiments where students learn the fundamentals of bipolar junction transistors (BJTs).

When integrating the 2N3904 into your circuit designs, always ensure a suitable current-limiting resistor is placed in series with the base terminal to prevent excessive base current from damaging the silicon junction when driven by microcontrollers or logic ICs. Pay close attention to pinout orientation (typically Emitter, Base, Collector from left to right when flat side faces you, but always verify with specific manufacturer datasheets). Proper decoupling and heat sinking considerations should be maintained if operating near maximum thermal and current thresholds.

10 x 2N3904 NPN Transistors