Explore authenticated messaging only as a separate software project. No Wi-Fi, Telegram, credentials, battery monitoring or emergency notification is included in the reviewed kit.
Secure Remote Notification Study - future extension is one focused build from the ESP32 Fall-Detection Learning Prototype. It uses the parts listed below to make a working electronics example, then you can combine it with the other projects in the kit.
Explore authenticated messaging only as a separate software project. No Wi-Fi, Telegram, credentials, battery monitoring or emergency notification is included in the reviewed kit.
Main kit plus a trusted network, independently reviewed communications code and an external notification service
Wire the parts, upload the sketch from the kit page, then test this project by watching the Serial Monitor or the output behavior.
You learn how the controller reads real sensor signals, makes a decision in code, and turns that result into a useful output.
Every item is in the kit — nothing extra to buy.
All 7 parts in one box, with this project and 5 more to build from them.
One of each part. Packs (resistor assortment, jumper wires) already hold more than a single build needs. independently reviewed communications code and an external notification service: included in the kit, ask us for it loose. Delivery is AED 20, free on orders AED 150+.
Reads acceleration and orientation relative to a startup baseline. A high- or low-acceleration event followed by sustained tilt starts a local 20-second countdown; the b…
Set FALL_DIAGNOSTIC=true to start the countdown from the button without moving the sensor. Check display states, debounce, countdown timing and cancellation, then restor…
Observe acceleration magnitude and orientation changes for controlled padded-bench motions. Record results before changing any thresholds; a separate logging sketch is r…