Educational access-control prototype only. Not suitable for securing doors, valuables, vehicles, or buildings. Do not connect to mains locks or real security systems. RFID reader/cards are missing from the linked catalogue parts and must be sourced/tested before launch.
Mixed-board access-control draft for keypad/servo access logic while RFID catalogue parts are sourced and tested.
Proposed contents — confirmed in writing before you pay. Quantities and exact models may change if a part is unavailable, and we tell you before that happens.
Lost or damaged a part? Every part name below opens its own page, so you can buy a replacement or an extra on its own.
Every one is built from the parts in the box, plus the basics listed under You'll also need.
Accepts a simple code and gives pass/fail feedback through light and sound.
Moves a small model latch after an accepted input; not for real door security.
Compares 5V Arduino and 3.3V ESP32 wiring considerations before adding an RFID reader later.
No projects in that group.
Tick steps off as you go — your place is kept on this device.
Research an access-control learning kit for RFID identity, servo locks, and simple authorization logic.
Assumes you have built a simple circuit before and can follow a wiring guide. You will install a toolchain and upload code.
Catalogued as suited to makers. Built around DIYKIT catalog research - high priority hardware. Classroom sets are quoted per seat — ask for a bulk price.
| Kit | Level | Parts | Build guide | Price |
|---|---|---|---|---|
| This kit RFID Access Control Learning Kit | Intermediate | 10 | 1 steps | On request |
| Arduino UNO Sensor & Output Starter Kit - LED… | Beginner | 10 | 8 steps | AED 85.00 |
| Biomedical Sensor & Bio-Signal Learning Kit | Intermediate | 6 | 7 steps | AED 101.50 |
| ESP32 & ESP8266 IoT Automation Kit | Intermediate | 24 | 11 steps | AED 180.00 |
| Smart Plant Monitor & Alert Kit - ESP32 Soil… | Beginner | 7 | 7 steps | AED 79.00 |
This kit is rated Intermediate. You should have built a simple circuit before and be comfortable with breadboard wiring. It is built around the mixed platform.
90-180 minutes. The build guide below breaks it into 1 steps.
All 10 components listed in the parts table are packed in the kit. Current availability depends on finished kit stock and component restock status.
This kit is quoted per order — the bill of materials changes with quantity and with any substitutions you ask for. Send the request and you get a fixed price back.
Recorded in our catalogue as suited to makers. Bulk pricing is available for classroom sets.
